How to Program Nissan Car Key Fobs
by Leonardo R. Grabkowski
Each automaker uses different technology to program keyless remotes to their vehicles. Most of the time, you can program new remotes at home with no problems; Nissan is no exception. If you have a lost or broken car key fob, you need to purchase another and then program it to your Nissan car or truck.
Step 1
Get in the vehicle and close and lock all of the doors.
Step 2
Quickly insert the key into the ignition 6 times (without cranking). This must be done within a 10 second time frame.
Step 3
Wait for the emergency flashers to light up. This signals you are in programming mode.
Step 4
Insert the key back into the ignition and turn the key to the accessory mode (ACC), without cranking the engine.
Step 5
Press the "Unlock" button on the remote key fob. Wait for the emergency lights to flash again. Remove the key, unlock the driver's side door and then open and close to exit programming mode.
References
Tips
- Repeat the procedure to have up to four remotes programmed to your Nissan car or truck. If you have trouble programming a remote, try replacing the battery.
Writer Bio
Leonardo R. Grabkowski has been writing professionally for more than four years. Grabkowski attended college in Oregon. He builds websites on the side and has a slight obsession with Drupal, Joomla and Wordpress.
