How to Program a Chrysler Keyless Entry Remote
by Matthew FortunaSince the 1990s, many Chrysler cars have come standard with keyless entry remotes. These remotes allow you to lock and unlock your doors, as well as open your trunk, start your car and sound your alarm. Your Chrysler keyless entry remote can be programmed at home and with only your car and your remote, and you can will not be forced to pay a Chrysler dealership to reprogram the remote.
Step 1
Press the lock button on your Chrysler remote five consecutive times at brief two second intervals.
Step 2
Place your key in the car's ignition and turn it to the right two clicks to the "Run" position on all Chrysler cars.
Step 3
Hold the unlock button. Then press and hold the panic button simultaneously. Release both buttons at the same time and you will hear a small beep to indicate that the programming is in effect.
Step 4
Press and release both the lock and unlock buttons at the same time.
Step 5
Turn the key to the off position and remove it from the ignition. Test your remote to see if the programming was successful.
Writer Bio
Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area. He has written about a wide range of topics across varying publications, including Demand Studios, wiseGEEK.com and Suite101.com, among others. He holds a Bachelor of Arts in journalism from Wayne State University.
