How to Replace a Power Mirror in a Chrysler Town & Country

by Contributor

Changing a power mirror on all model years of the Chrysler Town & Country is a task done quite easily at home. Order a replacement power mirror and disconnect your battery before removing the old mirror and replacing it.

Remove Old Mirror

Open the side door to the Chrysler Town & Country, and find the screw that holds the side mirror molding in place.

Take the screw out and remove the molding panel that attached around the outside of the power mirror.

Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

Unplug the electric connectors, and pull the mirror out of the molding.

Install New Mirror

Connect the electrical power mirror to the power source before putting the mirror back on the side door.

Put the new side view mirror into position on the Chrysler Town & Country. Attach the top and bottom mounting bolts. Secure them tightly into place.

Install the molding around the mirror, and tighten the screw that holds it in place.

Tip

  • check Removing a cold or frozen mirror can cause it to crack and cause injuries. Make sure the mirror is warm before starting any repair.

Warning

  • close Warranties on most vans, including the Town & Country, are void if you repair any part of the vehicle yourself.

Items you will need

About the Author

This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about It Still Runs, contact us.