How to Replace a Headlight Bulb in a Chrysler Sebring
by Editorial TeamIf you've owned your Chrysler Sebring for a few years, your headlight bulbs may need replacing. As long as you have the correct replacement bulbs in hand, completing the installation should only take a few minutes and won't require any special tools. These instructions don't apply to models made before 2000.
Step 1
Set the parking brake and remove the keys from the ignition. Open the Sebring's hood using the primary and auxiliary release latches.
Step 2
Remove the two headlight mounting screws, and then pry the plastic fasteners away from the assembly using a flathead screwdriver or other flat-bladed tool.
Step 3
Pull the headlight assembly away from the car. Be careful not to scratch the headlight lens or the exterior paint.
Step 4
Turn the bulb one-quarter turn counterclockwise and remove it from the assembly.
Step 5
Pull the old bulb directly out of the socket and replace it with the new one. Dispose of the old bulb to prevent it from becoming a hazard.
Step 6
Screw the bulb back into the assembly and press the assembly back into position.
Step 7
Test the headlamp to make sure it works before replacing the plastic fasteners and headlight mounting screws.
Tips
- Turn your headlights are off before opening the hood and handling the assembly.
Things You'll Need
- 9006 and 9005 replacement bulbs (low and high beam bulbs for 2007 and later models)
- 9007 replacement bulb (2001-2006 models)
- Flathead screwdriver
Writer Bio
This article was written by the CareerTrend team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about CareerTrend, contact us [here](http://careertrend.com/about-us).
