How to Change the oil in a 2002 Honda Recon 250
by Gregory CrewsUpdated November 07, 2017
Items you will need
Drain pan
Socket wrench
Allen wrench set
2 quarts of Honda ATV four-stroke motor oil
Changing the oil in a Honda Recon 250 is quick and simple to complete. It is important to change the oil every five to six outings with the ATV. This will prevent viscosity build-up in the engine and ensure the oil is consistently lubricating all the engine's moving parts. Always start the task by accessing the engine compartment and unscrewing the oil fill cap.
Ensure the ATV is parked on a flat and level surface. Place a drain pan under the engine.
Unscrew the drain bolt at the bottom of the pan with a socket wrench. Ensure all the oil drains out before tightening the bolt back to the drain pan.
Locate a plug on the side of the drain pan. It will be close to the bottom. Unscrew the plug with an Allen wrench.
Unscrew the oil fill cap on the top of the engine by hand. Pour in Honda ATV four-stroke motor oil in to the engine. Stop pouring when oil starts coming out of the small hole on the drain pan. Immediately screw the plug back in to the engine with the Allen wrench.
Tips
The Honda Recon 250 has a screen for an oil filter that does not need to be changed.
Warnings
Contact a local recycling company for disposal of the waste oil.
References
- "Honda TRX Haynes Repair Manual covering TRX250 Recon (1997 thru 2009), TRX250EX Sportrax (2001 thru 2009), and TRX350 Rancher (2000 thru 2005) "; John Haynes; 2009
Writer Bio
Gregory Crews has been in the film industry for three years and has appeared in more than 38 major motion pictures and 16 television shows. He also writes detailed automotive tutorials. His expertise in the automotive industry has given him the skills to write detailed technical instructional articles.
