How to Reset the Change Oil Light 1999, 2000, 2001 Suburban Yukon

by Contributor

Here is how to reset that annoying change oil light on your Yukon or Suburban.

Turn the ignition key to the RUN position but do not start the engine.

Fully push and release the accelerator pedal three times within five seconds.

If the CHANGE OIL SOON light flashes 2 times, the system is reset. If the light comes on and stays on for 5 seconds, the system did not reset. You may have to repeat the procedure a couple of times if the system does not reset.

About the Author

This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about It Still Runs, contact us.