How to Remove an O2 Sensor on a Town Country

by Alibaster Smith

The O2 sensor on the Chrysler Town and Country should last for at least 60,000 miles without failing. When the O2 sensor does fail, it will likely generate an error code and cause the check engine light to come on. This error code can be diagnosed easily at most auto parts stores free of charge. Replacement O2 sensors can also be purchased at most auto parts stores.

1

Jack up on the front jack point behind the radiator.

2

Place jack stands underneath the front pinch welds of the vehicle and lower the Town and Country onto the stands.

3

Climb underneath the Town and Country and locate the O2 sensor on the catalytic converter.

4

Unplug the electrical leads running to the O2 sensor.

5

Remove the O2 sensor by placing the O2 sensor removal tool over the end of the sensor and turning the sensor and removal tool counterclockwise with a socket wrench.

Items you will need

References

About the Author

I am a Registered Financial Consultant with 6 years experience in the financial services industry. I am trained in the financial planning process, with an emphasis in life insurance and annuity contracts. I have written for Demand Studios since 2009.

Photo Credits

  • photo_camera Hemera Technologies/AbleStock.com/Getty Images