How to Test a Faulty Ignition Coil Wire

by Nathan Fisher

Many electrical issues can be traced to loose or damaged wiring. Often however, the problem cannot be located through visual inspection, as the damage that is preventing current from traveling through the wire is located inside the wire's insulation. This can be especially problematic for fragile auto ignition wires covered by heavy insulation. For direct current applications, testing the integrity, or continuity, of a wire is a simple procedure that can be accomplished with a standard DC test light.

Test Procedure

Remove the ignition coil wire from the ignition coil and distributor cap terminals.

Attach one lead from the test light onto each metal terminal of the wire. If the bulb does not light up, you already know the wire is faulty.

Wiggle the wire, gently, along its length and at both ends. If the light goes off, or blinks, it indicates the wire has a short and needs to be replaced.


  • check Check the test light on the battery to be sure it is working properly and will provide you with a proper reading.


  • close Do not wiggle the wire too vigorously, or you could damage it during the test.

Items you will need

About the Author

This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about It Still Runs, contact us.

More Articles

Photo Credits

  • photo_camera The Readout image by Cinneman from