How to Repair a Car Seat Belt Buckle

by Oliver Hill

All cars are fitted with the standard shoulder belt. This belt goes over the shoulder and lap, offering maximum protection for the passenger. Seat belts do become subject to casual wear and tear; sometimes they can stop working altogether, making it dangerous for the driver and passengers. Fixing a problem with a seat belt buckle involves dismantling the seat belt.

Fully extend the whole of the seat belt to check for kinks.

Remove the bolt underneath the seat belt buckle. Hold the retractor straight and thread the seatbelt out. Remove the seat in the car if you need to gain a closer inspection of the belt.

Use the screwdriver to unscrew the current buckle from the car.

Screw in the new buckle. Then thread the seat belt through the new buckle.

Reinstall the small bar underneath the buckle to hold it in place.

Pull the seat belt out to make sure it's working properly.

Reinstall the seat if necessary.

Items you will need

About the Author

Oliver Hill started as a freelancer in 2009. His work can be seen on a variety of sites, including Service Magic and Thumbsticks. He is studying for a Bachelor of Arts in multimedia journalism at Bournemouth University.

Photo Credits

  • photo_camera seat belt receptacle image by Albert Lozano from Fotolia.com