How to Change a Rear Window in a Dodge Dakota

by Deborah McDonaldUpdated July 13, 2023
itstillruns article image
Cracked Windshield image by Stephen Jacoby from Fotolia.com

Having a damaged back windshield in your Doge Dakota isn't a problem you should ignore. It reduces your visibility, it makes your vehicle appear less aesthetically pleasing, and having visible damage to either windshield can earn you a hefty fine from the police. While repairing a damaged rear windshield is not a repair task you want to put off, installing the windshield incorrectly will make your Dodge Dakota dramatically less safe in the event of a collision. Due to the difficulty of this task, it is useful to seek professional help to install your new rear windshield.

Things You'll Need:

  • Dodge Dakota trim tool or flathead screwdriver
  • Razor knife
  • Crowbar
  • Assistant
  • Clean cloths
  • Urethane primer
  • Urethane adhesive
  • New windshield

1. Pry away the trim from around your rear windshield

Pry away the trim from around your rear windshield. Most auto parts stores will have a trim tool designed to remove the trim specifically from the Dodge Dakota, but in the absence of this tool, a flat-head screwdriver will work. Slide the blade of your tool under the edge of the trim and force it up, making sure not to break the tabs underneath.

2. Cut through the adhesive band holding the windshield

Cut through the adhesive band holding the windshield. Cut around the edges using a razor knife.

3. Slide a crowbar under one of the bottom corners of the windshield and pry it up

Slide a crowbar under one of the bottom corners of the windshield and pry it up. Work around the edges of the windshield with your crowbar until it is loose in its frame.

4. Lift the windshield and pull it out of your Dodge Dakota

Lift the windshield and pull it out of your Dodge Dakota. You will need the help of an assistant for this step as the windshield is both heavy and fragile.

5. Clean the area around the frame and in the groove

Clean the area around the frame and in the groove where the windshield sits with a clean, wet cloth. Once your've removed any dirt, oil, or debris, dry it with a clean, dry cloth.

6. Lay down a coat of urethane primer

Lay down a coat of urethane primer in the groove where the windshield sits.

7. Lay down a band of urethane adhesive over the primer

Lay down a band of urethane adhesive over the primer. The adhesive must go on over the primer or it will not bond to the windshield.

8. Install the new windshield into its frame

Install the new windshield into its frame. Make sure it lays flat and even in its frame and that you install it right side up. It's recommended that you use your assistant again for this step.

9. Replace the trim

Replace the trim.

Video: Dodge Dakota sliding rear window repair replacement

Comments on this video:

  • Well thanks for the video bad news is I have to take my camper shell off 1st and clean out all the tools in the back but I think I'm gonna take it down have it done but Hey thanks for the video this is cool bye. You get a thumbs up Hit the like button boys
  • I want to pull out my sliding glass window and put a full glass window in my Dakota

More Articles

article divider
×